The FLATLITE® advantage

FLATLITE® ELECTROLUMINESCENT LIGHT IS MUCH DIFFERENT FROM CONVENTIONAL ELECTROLUMINESCENT LIGHT.

FLATLITE® is manufactured using a roll to roll manufacturing process
It is not screen printed like traditional EL. There is no electrical busbar running through the lamp. Electrical connectors can be anywhere on the lamp. Edge to edge illumination. Lamp hundreds of meters long. Very large panels. Cut into any shape with something as basic as scissors. No extra tooling costs. FLATLITE lamp is a UL Recognized component under the UL48 standard for Signage.

Advanced Power Supplies
Compensating Power supplies automatically adjust voltage to extend the life of the lamp. In-depth research into the electrical characteristics of phosphors enables design of circuits that are most the efficient EL drivers. All AC input Power Supplies are UL listed to the UL48 standard for Signage.

Superior Technology
Lower Power Consumption due to efficient foil rear electrode. 'Encapsulated' high quality phosphors are resistant to moisture. ITO outer layer is ink compatible Dupont Melanex film.

E-Lite's Experience (see 'About E-Lite' page)
Commercial installations since 1996. Industry Pioneer in EL production. Extensive Testing & Continuing Research

As an example, E-Lite mantains a continuous, rigorous life and brightness testing program on every lot produced since the mid 1990's.

FLATLITE® lamp and system components are manufactured under one or more of the following US Patents: 5,019,748; 5,045,755; 6,043,609; 6,304,039; 6,833,669 All content © Copyright 2004-2005 FLATLITE® & E-LITE. All Rights Reserved. All Trademarks on this website belong to FLATLITE® & E-LITE unless otherwise noted.